Bluetooth Operation - Blaupunkt PP20 Owner's Manual

20 25
station and play. If you also input 3 digits or 4 digits from remote control, the unit will play
and get the correspondence FM frequency stations between 87.5-108MHz. For example, if
you input 1043 from remote control, then 1043 will show on display and play FM station
frequency at 104.3MHz.
Press to increase the volume，press

Bluetooth operation.

1. Power on the unit, short press the
button switch to "Bluetooth" mode, the "BLUE" will show on LCD screen and come
along with one notice sound，then the unit is ready to pair with other Bluetooth
device.
2. Activate the Bluetooth function on your device in order to start Bluetooth scanning
and pairing. Check the available Bluetooth device list and select "BLAUPUNKT PP20",
input " 0000" in case of POP screen request. When there have a short sound notice
sound come out from speaker, that is mean the unit has paired with your Bluetooth
device already. If you switch off the Bluetooth function on your Bluetooth device,
there will have two short notice sounds come out from speaker which means the
Bluetooth is disconnect with speaker.
3. Select the music and play on your Bluetooth device, then the speaker will wireless play
the music via Bluetooth. In Bluetooth mode, you can get play/pause, press/next
operation by
Important: The Bluetooth operation for PP25 is same, just the pairing name is "
BLAUPUNKT Pp25".
USB/SD/micro SD card playback operation
Before start the USB/SD/micro SD card playback operation, please insert the
USB/SD/micro SD card into the relative slot on the rear panel first, the unit only can detect
and playback the USB/SD card when there have available device in the slot. Please do not
insert the SD and micro SD card at the same time. Only available play either SD card or
micro SD in one time.
Power on the unit, short press
mode; the unit will read out MP3 music from USB/SD device and play start from first song
automatically. While the USB or SD model is playing, short press
control; short press
or button for fast backward or forward selection and resume play after release
the or button.
Notes:
a. Please do not use any extent USB cable for connection and playing, because that will
impact signal transfer from device, an intermittent sound will happen.
b. The unit support MP3 320 kbps and WMA 192kbps, Support USB card, SD card, and TF
button for sound output; then short press mode
/ / key from remote control or front panel.
button and press mode button switch to USB or SD
or button for previous or next track selection; press and hold
to decrease the volume.
13
button for play/pause