Table of Contents
Advertisement
BASIC OPERATION
Positioning your DAB/FM Radio
Please consider carefully in advance where your Radio will be situated and make sure that
it is:
•
At and stable surface
•
Within 1.4 metres of a power socket (if using mains power). Please ensure that
the mains power lead is not a trip hazard.
•
At least 1 metre away from other electrical appliances to avoid interference
•
Where you can fully extend the telescopic aerial
•
Never place your Radio directly onto antique or polished surfaces
Power connection
1.
Connect the mains power lead into the socket on the back of the radio and fully
extend the telescopic aerial in a vertical position to obtain the maximum
signal strength.
2.
Plug the power adaptor into the mains power wall socket and switch on.
3.
Slide the On/Off ower switch on the back of the radio to On. The product display
will light up, 'Welcome to Digital Radio' will be displayed and then your radio
will go to Standby mode.
Note:
When you are using batteries to power your radio, slide the On/Off power
switch on the back of the radio to On and press and release the power button. The
product display will light up, 'Welcome to Digital Radio' will be displayed and
then your radio will immediately scan for DAB stations. There is no Standby mode
when you are using battery power.
8
Hide quick links:
Advertisement
Table of Contents
