Cautions On Handling - Toshiba e-STUDIO 12 Operator's Manual

Handle and use the machine gently and carefully.
• Do not drop the copier, subject it to shock or strike it against any object.
• Do not touch the photoconductive drum (green portion).
Scratches or smudges on the drum will cause dirty copies.
• Do not place anything on the paper cassettes or original feed tray.
• Never allow the power cable to be trampled on or pinched between hard objects, otherwise
an accident or electrical trouble might occur.
• Do not allow any metal items such as paper clips to fall into the copier.
Be sure to turn OFF the power switch
• When you leave your office at night.
• If a power failure occurs.
When turning OFF the power switch, be sure to do so only after the machine
cycling has come to a complete stop.
Be sure to disconnect the power-cord plug:
• When you do not intend to use the machine for an extended period of time.
Be sure to turn OFF the power switch immediately and call for service:
• If an unusual noise is heard from the copier.
• If the outside of the copier becomes unusually hot.
• If any part of the copier is damaged, or it has been dropped.
• If the copier has been exposed to rain or liquid.
It is recommended that only supplies made or designated by Toshiba be used for the
copier in order to optimize copy quality. All supplies should be stored in a cool, dry
area.
For optimum performance, it is recommended that high quality 80 g/m
bond paper be used.
Paper of lower quality may contain inherent properties such as excess paper dust and
may lead to premature servicing.
COPIER INSTALLATION
2
. Xerographic
1
9