Two-Sided Copying - Toshiba e-STUDIO 12 Operator's Manual

To close the bypass tray, perform
step1 and then step 2 in the
illustration and push the round
projections at the right of the tray
until the tray clicks into place.
Set the paper guides to the copy paper width. Insert the copy paper (print face down)
all the way into the bypass tray.
Paper must be fed narrow side into the feed slot.
Transparency film, labels, and other special purpose papers must be fed
individually.
When copying onto transparency film, remove each copy promptly. Do not
let copies stack up.
When loading an envelope, make sure that it is straight and flat.
Press the tray select (
using standard copy paper. Press the print (

TWO-SIDED COPYING

Two-sided copying can be made on this copier using the bypass tray.
Example: The following two originals will be copied onto two sides of copy paper.
First original
) key to select the bypass tray. Set the number of copies if
Second original
) key.
Face up or face down
Face down
Face up
BYPASS FEED
2
Print face
17