Table of Contents
Advertisement
Press the print (
currently selected parameter number for the program will blink on the right side of the
display.
Select the desired parameter using the right copy quantity (
parameter number will blink on the right of the display.
Program
No.
1
Auto clear time
2
Preheat mode
3
Auto power shut-
off timer
4
Stream feeding
mode
5
Auto power shut-
off mode
Factory default settings are indicated with an asterisk (*).
Press the print (
the entered value will be stored.
To change the setting or to set another mode, press the clear (
copier will return to step 2.
Press the light (
DISPLAYING TOTAL NUMBER OF COPIES
Use the following procedure to display the total number of copies.
Press the clear (
Press and hold down the clear (
of copies will appear in two steps, each with three digits.
Example: Total number of copies is 1,234.
) key. The entered program number will be steadily lit and the
Mode
0
OFF
3
90 sec.
0
30 sec.
0
2 min.
3
30 min.
0
OFF
0
OFF
) key. The right-hand number in the display will be steadily lit and
) or dark (
) key to return to the normal copy mode.
) key to reset the display to one.
) key for approximately 5 seconds. The total number
USER PROGRAMS
) key. The entered
Parameters
1
30 sec. * 2
4
120 sec.
5
1
60 sec. * 2
* 1
5 min.
2
4
60 min.
5
* 1
ON
* 1
ON
) key. The
60 sec.
10 sec.
90 sec.
15 min.
3
120 min.
21
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Table of Contents
