Pnp/Pci Configuration - EPOX EP-58MVP3C-M Manual

3-12 CHAPTER 3
PM Events:
AWARD BIOS defines 7 PM Events in the power management mode (Doze &
suspend). The user can initialize any PM Events to be "Enable" or "Disable".
When the system detects all of the enabled events do not have any activity, it will
start the system Doze timer first if the "Power Management" is not "Disabled". Once
the system Doze timer is timed out, it will process doze power saving procedure
by starting the system suspend timer. When the suspend timer times out , all of the CPU
clock will stop by dropping system clock down to zero and remains this way
until any one of the "Enabled" event occurrs.

3-5 PNP/PCI CONFIGURATION

The PNP/PCI configuration program is for the user to modify the PCI/ISA IRQ signals
when various PCI/ISA cards are inserted in the PCI or ISA slots.
WARNING : Any misplacing IRQ could cause system can't pick out the rescouces.
PNP OS Installed
Resources Controlled By
Reset Configuration Data
ACPI function
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
DMA-7 assigned to
Figure 3-6 PCI CONFIGURATION SETUP
ROM PCI/ISA BIOS(2A5LEPA9)
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
: No PCI Dynamic Bursting
: Manual PCI Master 0 WS Write
: Disabled PCI Delay Transaction
: Enabled PCI Master Read Prefetch
: Legacy ISA PCI#2 Access #1 Retry
: Legacy ISA AGP Master 1 WS Write
: PCI/ISA PnP AGP Master 1 WS Read
: Legacy ISA
: PCI/ISA PnP PCI IRQ Actived By
: PCI/ISA PnP Assign IRQ For USB
: PCI/ISA PnP Assign IRQ For VGA
: PCI/ISA PnP
: Legacy ISA
: Legacy ISA
: PCI/ISA PnP
ESC : Quit
: PCI/ISA PnP
F1 : Help
: PCI/ISA PnP
F5 : No Change
: PCI/ISA PnP
F7 : Load Setup Defaults
: PCI/ISA PnP
: PCI/ISA PnP
: Enabled
: Enabled
: Enabled
: Enabled
: Disabled
: Enabled
: Disabled
: Level
: Enabled
: Enabled
: Select Item
PU/PD/+/- : Modify
(Shift) F2: Color