EPOX EP-58MVP3C-M Manual page 18

Typematic Rate Setting
Enabled Enable typematic rate and typematic delay programming.
:
Disabled Disable typematic rate and typematic delay programming. The system
:
BIOS will use default value of 2 items and the default is controlled by
the keyboard.
Typematic Rate(Chars/Sec)
6 : 6 characters per second.
10: 10 characters per second.
15: 15 characters per second.
24: 24 characters per second.
Typematic Delay(Msec)
character displayed, when holding a key.
250 : 250msec.
500 : 500 msec.
750 : 750 msec.
1000: 1000 msec.
Security Option: This category allows you to limit access to the system and Setup,
or just to Setup. The default value is Setup.
System: The system will not boot and the access to Setup will be denied if the
correct password is not entered at the prompt.
Setup : The system will boot, but the access to Setup will be denied if the correct
password is not entered at the prompt.
PCI/VGA Palette Snoop: This filed controls the ability of a primary PCI VGA
controller to share a common palette (when a snoop write cycles) with an ISA
video card. The default value is Disabled.
Enabled:If an ISA card connects to a PCI VGA card via the VESA connector
and the ISA card connects to VGA monitor and uses the RAMDAC of
PCI card, the PCI/VGA Palette Snoop is enabled.
Disabled:Disable the VGA card Palette snoop function.
Video BIOS Shadow: It determines whether video BIOS will be copied to RAM.
However, it is optional from chipset design. Video Shadow will increase the video
speed.
Enabled : Video shadow is enabled.
Disabled: Video shadow is disabled.
This determines the typematic rate.
:
:
8 : 8 characters per second.
12: 12 characters per second.
20: 20 characters per second.
30: 30 characters per second.
This determines the time between the first and second
:
AWARD BIOS 3-5