EPOX EP-58MVP3C-M Manual page 24

AWARD BIOS 3-11
RTC Alarm Resume
This option allows you to have the system turn on at a preset time each day or on a
certain day. This option is only available when used an ATX power supply.
Enabled : The system will turn on at the preset time.
Disabled : Normal Setting
Date(of month)
This field is to set the date that the system will turn on. The default value is 0.
0 : Turn on the system on everyday at the preset time.
1-31 : Represets the date of the month that you need the system to turn on.
Time (hh:mm:ss)
This field is to set the time that you need the system to turn on. The default value
is 08:00:00.
HDD Standby Mode
When system stops reading or wiriting HDD, the timer starts to count. The system
will cut off the HDD power when timer runs out of time. The system will not resume
operation until either a read from or a wirte to HDD command is executed again.
Doze Mode
The system hardware will drop down CPU clock from nomal working speed
when Doze mode time-out occurs.
Suspend Mode
When the system suspend timer times out, the system will enter the suspend mode
and the chipset will stop CPU clock immediately. The power consumption in
Suspend Mode is lower than in standby mode. The screen is also blanked out.