EPOX EP-58MVP3C-M Manual page 28

IDE Primary Master PIO: The default value is Auto.
Auto : BIOS will automatically detect the Onboard Primary Master PCI
IDE HDD Accessing mode.
Mode0~4 : Manually set the IDE Accessing mode.
IDE Primary Slave PIO: The default value is Auto.
Auto : BIOS will automatically detect the Onboard Primary Slave PCI IDE
HDD Accessing mode.
Mode0~4 : Manually set the IDE Accessing mode.
IDE Secondary Master PIO: The default value is Auto.
Auto : BIOS will automatically detect the Onboard Secondary Master PCI
IDE HDD Accessing mode.
Mode0~4 : Manually set the IDE Accessing mode.
IDE Secondary Slave PIO: The default value is Auto.
Auto : BIOS will automatically detect the Onboard Secondary Slave PCI
IDE HDD Accessing mode.
Mode0~4 : Manually set the IDE Accessing mode.
Onboard FDC Controller: The default value is Enabled.
Enabled : Enable the Onboard floppy drive interface controller.
Disabled : Disable the Onboard floppy drive interface controller,
When using On-card ISA FDC's controller.
Onboard UART 1: This field allows the user to sellect the serial port. The default
value is 3F8H/IRQ4.
COM1: Enable Onboard Serial port 1 and address is 3F8H/IRQ4.
COM2: Enable Onboard Serial port 1 and address is 2F8H/IRQ3.
COM3: Enable Onboard Serial port 1 and address is 3E8H/IRQ4.
COM4: Enable Onboard Serial port 1 and address is 2E8H/IRQ3.
Disabled: Disable Onboard Serial port 1.
Onboard UART 2: This field allows the user to sellect the serial port. The default
value is 2F8H/IRQ3.
COM1: Enable Onboard Serial port 2 and address is 3F8H/IRQ4.
COM2: Enable Onboard Serial port 2 and address is 2F8H/IRQ3.
COM3: Enable Onboard Serial port 2 and address is 3E8H/IRQ4.
COM4: Enable Onboard Serial port 2 and address is 2E8H/IRQ3.
Disabled: Disable Onboard Serial port 2.
AWARD BIOS 3-15