Barco Nio E-2621 Getting Started Manual page 65

General tips
clicking on the rectangle that represents it, deselect Attached
and click the Apply button.
Note: Since Windows will not let you detach the primary display
connected to a particular controller, you may need to temporarily
make another display the primary display
For the display which is still attached click Click on the Advanced
4.
Button.
Select the Adapter tab and then click on the List All Modes
5.
button. Select the resolution and refresh rate that your Nio display
display supports from the dialog box and click OK.
In the Adapter box, the Adapter string shows if this
Note:
display is the First View or the Second View attached to the display
controller. Please make a note of this, so that you can arrange the
displays in the correct order later if necessary.
Click OK on the bottom of the Adapter Control Panel. If the "OK"
6.
button on the bottom of the Adapter Control Panel is not visible,
press the TAB key once and then press CTRL+Enter to select OK.
Click OK in the "Windows will now apply your new desktop
7.
settings" dialog box. Your Nio display display should now
synchronize and display the Windows desktop.
Click Yes when asked, "Your desktop has been reconfigured. Do
8.
you want to keep these settings?"
To set the resolution of the second display attached to the
BarcoMed display controller you are working with, go back to the
"Settings" tab of the "Display Properties Control Panel". If
necessary attach the second display you detached in step 2 above,
by right clicking on the rectangle that represents it and selecting
Attached.
Now repeat steps 5-8 above for this display.
Nio display systems 65