Barco Nio E-2621 Getting Started Manual page 48

Installing drivers and software
Express Installation or
Custom Installation.
In both cases all components will be installed.
If you choose the Custom option, you will have the option to
modify the following driver settings during the installation
process:
• Display Options (color mode),
• Palette Modes, and
• Drawing Modes.
Please refer to your application manuals for information on the
correct Color, Palette and Drawing modes to select.
Note: If you select either of the two Static Gray palette modes
available under the 256 Color mode, the output from your MXRT
display controller will be grayscale and not color when connected
to Nio color displays. For more information about Color, Palette and
Drawing modes please refer to the Barco Control Panel section of
the Barco on-line User Manual.
If you choose the Express option, you can modify the above driver
settings through the Barco tab of the advanced options of the
Windows Display Control Panel. Once the driver and software
installation is complete, you can refer to the Display Properties
section of the Barco online user manual for more information
about these options.
When the driver setup is complete, click the Finish button.
6.
The Barco Product Installation Wizard will now guide you through
the installation of MediCal QAWeb, BarcoMed SelfExam, and the
Barco on-line documentation.
When the Setup complete message appears, select Reboot
7.
System Now and click Finish.
After the system reboots, Windows may display either the Digital
8.
Signature Not Found message or The software you are installing
for this hardware has not passed Windows logo testing to verify
48 Nio display systems