Barco Nio E-2621 Getting Started Manual page 54

Installing drivers and software
the resolution of your Nio display on page 64 in the Troubleshooting
section of this manual.
Reinstalling drivers
You can install new drivers or reinstall existing drivers at any time by
using the Barco Set-up wizard on your B
Installation CD-ROM, see Installing the B
on page 51 of this manual.
Uninstalling the drivers and software
To uninstall the Barco drivers, software or documentation for your Nio
display Systems, please use the Windows Add/Remove Programs utility.
This can be found in the Windows Control Panel.
Note: If you installed your
enabled, the wizard will warn you that DualView must be disabled
before the drivers can be uninstalled. This is normal, please follow
the prompts from the wizard.
Command line (Silent) Install of Drivers and Software
Specifying the silent install option causes most of the GUI associated
with the installer to disappear. A background progress window will still
be visible, but no user input will be required.
The silent install behavior is dictated by the SETUP.INI file. Each
application is allowed to have separate command-line parameters for
normal and silent installs.
To install the drivers and software silently, please follow the steps
below:
Insert the B
1.
ARCO
CD/DVD drive. When the Barco Product Installation Wizard starts
click "Cancel".
Click the Start button in the task bar.
2.
Click Run.
3.
Click Browse and
4.
54
B M
ARCO
N Display System Installation CD-ROM into your
IO
N Display System
ARCO IO
M drivers and software
ARCO ED
drivers with DualView
ED
Nio display systems