Barco Nio E-2621 Getting Started Manual page 21

Display parts, controls and connectors
Connect the external power supply, delivered with the display, to
this connector.
+5 Vdc, 0.25 A power output for accessories.
5.
DVI (digital) video input
6.
Slot for security cable (e.g., Kensington lock)
7.
USB upstream port
8.
Connect this connector to the PC USB bus if you wish to connect
USB devices to the display's USB downstream port.
USB downstream port
9.
When the display is connected to the PC USB bus, you can connect
USB devices, such as keyboard, mouse, digital camera, to this
connector.
Tilt & swivel foot clip
10.
The display is shipped with this clip in the foot to protect the tilt &
swivel mechanism during transport. After unpacking, you should
remove this clip.
Do not throw the clip away! Should the display have to be packed
and shipped later, the clip must be applied to the foot again.
Nio display systems 21