Proximus Forum 500 User Manual page 24

Using Forum Voicemail
2. Enter the call number of the terminal whose voicebox messages you wish
to access. Confirm with the star key
You cannot access the voicebox unless authorisation for Remote control
has been activated.
3. Enter your PIN after the prompt. For a new voicebox, the PIN is always
preset to "0000."
Forum Voicemail will inform you as to whether there are any new
messages in your voicebox.
4. You can now query and edit messages and make settings for your
voicebox.
Tip: When listening to new messages you can terminate the
connection to the voicebox by entering the code-number
procedure 77; all messages you have already listened to will keep
the status "new".
5. For all further operating steps, follow the instructions given in the voice
menus.
Tip: When listening to a message, you can call the person back
immediately by pressing the
... from a telephone whose call number is assigned to your voicebox
1. Enter the internal call number your system administrator has configured
for Forum Voicemail.
2. If the querying of a secret code is switched on, the enter it after the
request.
You will now be directly connected to your voicebox, and Forum Voicemail
will inform you whether there are any new messages in your voicebox.
3. You can now query and edit messages and make settings for your
voicebox.
Tip: When listening to new messages you can terminate the
connection to the voicebox by entering the code-number
procedure 77; all messages that you have already listened to will
keep the status "new".
4. For all further operating steps, follow the instructions given in the voice
menus.
22
Calling Your Voicebox from an Internal Terminal
*
.
7
key on your terminal.