Mounting Plate; Rigging The Power Spot 575 - Elation power spot 575 User Manual

Power Spot 575™
secure a clamp to the unit. To attach a clamp to the unit, attach a clamp
that is rated to handle the weight of the unit to your cam lock. After a clamp
has been attached to the cam lock, attach the cam locks to the designated
position on the bottom of your unit. Lock the cam locks into position by
turning the wing nuts 90°.
b) Be sure to always use two cam locks mounted to the bottom of unit to
ensure safe truss mounting (each two opposite threads max. M10x20).
2.2 Secure the POWER SPOT 575™
Regardless of the rigging option you choose for your POWER SPOT 575™ always
be sure to secure your fixture with a safety cable. The fixture provides a built-in
©Elation Professionals® Los Angeles, Ca.
4x M10x20mm
4x Camlock
- wwww.ElationLighting.com
90°
12
- Page