Lamp Change; Safety Regulations; Realize The Lamp Change - Elation power spot 575 User Manual

Power Spot 575™
6. Lamp Replacement
For a proper and safe lamp change, please read this chapter carefully and follow all
instructions.

6.1 Safety Regulations

• Pull out the main plug!
• Wait min. 20 minutes after the last operation to cool down the fixture.
• Don't touch the bulb of the lamp with bare fingers (this can cause damages.
• Before you put the POWER SPOT 575™ into operation close the casing,
otherwise your retina can be hurt!

6.2 Lamp Change

6.2.1 Be sure the unit is disconnected from it's main power supply.
6.2.2 Always allow ample time for the unit to properly cool before attempting any type of
service or repair..
6.2.3 To expose the lamp, remove the four Philips screws that secure the lamp socket
assembly to head. Carefully pull back the socket assembly.
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com
33
- Page