System Statistics; Network Interfaces - Sena Parani MSP1000 User Manual

9. System statistics

9.1. Network interfaces

Network interfaces statistics displays basic network interfaces usage of the Parani-MSP1000, lo, eth0
and eth1. lo is a local loop back interface and eth0 and eth1 are network interfaces of Parani-
MSP1000.
9.2. IP
The IP Statistics screen provides statistical information about packets/connections using an IP
protocol. Definitions and descriptions of each parameter are described below:
Forwarding :
Specifies whether IP forwarding is enabled or disabled.
DefaultTTL :
Specifies the default initial time to live (TTL) for datagrams originating on a particular computer.
InReceives :
Shows the number of datagrams received.
InHdrErrors :
Shows the number of datagrams received that have header errors. Datagrams Received Header
Errors is the number of input datagrams discarded due to errors in their IP headers, including bad
checksums, version number mismatch, other format errors, time-to-live exceeded, errors
discovered in processing their IP options, etc.
InAddrErrors :
Specifies the number of datagrams received that have address errors. These datagrams are
Figure 9-1 Network interfaces statistics
60