Smtp Configuration - Sena Parani MSP1000 User Manual

the registered Domain Name, User Name, and Password. After applying the configuration change,
users can access the Pro Series using only the Domain Name.

3.3. SMTP Configuration

The Parani-MSP1000 can send an email notification when the number of system log message s
reaches to certain value The user must configure a valid SMTP server send these automatically
generated emails. The Parani-MSP1000 supports three SMTP server types:
 SMTP without authentication
 SMTP with authentication
 POP-before-SMTP
These examples can be seen in Figure 3-3. Required parameters for each SMTP configuration
include:
 SMTP server IP address
 SMTP user name
 SMTP user password
 Device mail address
The device mail address specifies the sender' s email address for all log and alarm delivery emails.
SMTP servers often check only the sender' s host domain name of the email address for validity.
Consequently, the email address set for the device can use an arbitrary username with a registered
hostname (i.e. arbitrary_user@yahoo.com
The SMTP user name and SMTP user password are required when either SMTP with
authentication or POP-before-SMTP mode is selected.
Figure 3-2 Dynamic DNS Configuration
or anybody@sena.com).
23