Ftp Configuration - Sena Parani MSP1000 User Manual

The Port forwarding configuration has four parameters as follows:

Local port
The source TCP or UDP port number

Remote IP
The destination IP address

Remote port
The destination TCP or UDP port number

Protocol
TCP or UDP
For example, when a device whose IP address is 172.16.0.10 runs as a Web server, the configuration
should be as follows:

Local port: 8080
Any TCP port number except Telnet(23), SSH(22), HTTP(80) and HTTPS(443) port
These ports are already used by the Parani-MSP1000 for configuration.

Remote IP: 172.16.0.10

Remote port: 80

Protocol: TCP

4.4. FTP configuration

The Parani- MSP1000 provides FTP(File transfer profile) service. Mobile phones, PDA s and PCs are
able to upload and download any file to/from the Parani-MSP1000.

FTP service
When this value is "Enable", the Parani-MSP1000 provides the FTP service.

Base directory
The directory for the FTP service. User space(2MB), ram(8MB) and cf-card are available.
Please note that if the directory is "RAM", the files will be stored in the ram. The files will be
removed when the Parani-MSP1000 restarts.
Figure 4- 5 Bluetooth FTP Configuration
32