Miscellaneous; Vertex Configuration - Sena Parani MSP1000 User Manual

5.5.9. Miscellaneous


7-bit data emulation
This option is useful in using with the Parani-SD Series or the Parani-ESD Series. The Parani-
SD/ESD Series do not support 7-data-bits. The Parani-MSP1000 emulates 7-data-bits instead of
the Parani-SD/ESD Series.
Note: In order to use 7-bit data emulation, the serial device connected to the Parani-SD/ESD
should support Odd, Even or Space parity (while the Parani-SD/ESD is set to No Parity). The 7-bit
data emulation option cannot be used with non-parity.

5.6. Vertex configuration

It is a configuration to send the date delivered from a host to all of connected Bluetooth devices. The
configurable parameters are as follows:
 Vertex port
This is a TCP port to communicate with Bluetooth devices.
 Inactivity timeout
If there is no data for the configured inactivity timeout, the network session will be terminated.
Figure 5-13 Miscellaneous setting
Figure 5- 14 Vertex configuration
43