System Status & Log; System Status; System Logging - Sena Parani MSP1000 User Manual

8. System status & log

8.1. System status

The Parani- MSP1000 displays the system status. This screen is used for management purposes.
System status data includes the model name, serial number, firmware version and the network
configuration of the Parani-MSP1000.

8.2. System logging

The Parani- MSP1000 provides the system logging feature as well as the system status display. The
users can configure the Parani-MSP1000 to enable or disable the system logging process and select
the system log buffer size and the log storage location.
 Enable/Disable
This parameter define s whether to use system logging.
 Log location
The system log can be stored to in the Parani-MSP1000 internal memory, the ATA/IDE fixed
disk card inserted in CF slot or remote SYSLOG server. If the internal memory is used to store
system log data, the log data will be cleared when the Parani- MSP1000 is turned off. To preserve
the system log data, set the storage location to be the ATA/IDE fixed disk card or SYSLOG server.
 SYSLOG server name & log facility
The Parani-MSP1000 supports the use of a remote message logging service, SYSLOG service
for the system. To use the remote SYSLOG service, the user must specify the SYSLOG server' s
Figure 8-1 System status
58