Network Configuration; Ip Configuration; Ethernet 0 (Eth0) Configuration - Sena Parani MSP1000 User Manual

3. Network Configuration

3.1. IP Configuration

3.1.1. Ethernet 0 (eth0) configuration

The Parani-MSP1000 requires a valid IP address to operate within the user' s network environment.
If the IP address is not readily available, contact the system administrator to obtain a valid IP address
for the Parani-MSP1000. Please note that the Parani-MSP1000 requires a unique IP address to
connect to the user' s network.
The users may choose one of two Internet protocols in setting up IP address: i.e.
 Static IP
 DHCP (Dynamic Host Configuration Protocol)
The Parani-MSP1000 is initially defaulted to STATIC mode, with a static IP address of 192.168.161.5.
Table 3-1 shows the configuration parameters for all two IP configurations. Figure 3-1 is an example of
what the actual web-based GUI display looks like.
Static IP
DHCP
Table 3-1 IP configuration Parameters
IP address
Subnet mas k
Default gateway
Primary DNS/ Secondary DNS
Primary DNS/ Secondary DNS (Optional)
Figure 3-1 IP Configuration
19