Sena Parani MSP1000 User Manual page 45

IP Mode (eth0) : Static IP
--------------------------------------------------------------------------------
1. System status
2. Bluetooth neighborhoods
3. PAN connections
4. LAP & DUN connections
5. SPP connections
6. TCP connections
<Enter> Refresh
---> 5
----------------------------------------------------------------- ---------------
SPP connections
--------------------------------------------------------------------------------
No. BD address
1. 00:01:95:06:7C:4A
2. 00:01:95:05:CB:DF
Enter a command, available commands are as follows:
dc [index] - disconnect the connection
---> 2
Select data stream to monitor:
1. SPP ---> TCP
2. SPP <--- TCP
3. SPP <--> TCP
---> 3
Select monitoring mode:
1. Text
2. Binary
---> 2
Press 'Q', to exit
Press SPACE, to stop
Press ESC, to menu
<16:04:30, SPP -> TCP>
0000h: 61 73 64 73 61 64 73 61 64 73 64 61 73 61 64
<16:04:30, SPP <- TCP>
0000h: 61 73 64 73 61 64 73 61 64 73 64 61 73 61 64
Note: The configuration menu via serial port doesn' t support port monitoring because the data rate of
serial port is too slow to sniff the Bluetooth data.
IP Addr. (eth0) : 192.168.11.30
Device name LM
PSD200v2.0.0 -067C4A
PSD100v1.1.0-05CBDF
45
RSSI LQ
M 0 214
M 0 214
; asdsadsadsdasad
; asdsadsadsdasad