Connections; Monitoring (Sniffing) - Sena Parani MSP1000 User Manual

5.7. Connections

The SPP connections currently connected to the Parani-MSP1000 are displayed. Definitions and
descriptions of each parameter are described as follows:

Inf
The Bluetooth interface

BD address
The remote BD address

Service description
The network service linked with the SPP connection is displayed.

5.8. Monitoring (Sniffing)

The Parani-MSP1000 supports port monitoring (sniffing) functionality for debugging and installation.
The port monitoring enables the user to sniff the data received/sent from/to SPP.
To access the port monitoring:
1) Access the console management via Telnet or SSH
2) Select the Monitoring menu, SPP connections and the connection to sniff
-------------------------------------------------------------------------------
Welcome to MSP1000 configuration page
Current Time : 8/26/2007 06:55:14
F/W Rev. : v1.0.0
IP Mode (eth0) : Static
-------------------------------------------------------------------------------
1. Network configuration
2. System administration
3. System status & log
4. CF card configuration
5. Monitoring
6. Save changes
7. Exit without saving
8. Exit and apply changes
9. Exit and reboot
<ESC> Back, <ENTER> Refresh
--> 5
--------------------------------------------------------------------------------
Welcome to MSP1000 monitoring menu
Current time : 07/28/0107 16:03:36
F/W Rev. : v0.0.1_0827_1
Figure 5-15 SPP connections
Serial No.
MAC Addr.(eth0) : 00:01:95:AF:BE:11
IP Addr.(eth0) : 192.168.11.30
Serial No.
MAC Addr.(eth0) : 00:01:95:AF:BE:11
44
: MSP1000 -00001
: msp1000-test-2