Network Service - Sena Parani MSP1000 User Manual

 Timeout
The Parani-MSP1000 waits until the received data size is the configured fixed size or the timer is
expired. If the timeout is zero, it means unlimited.
 Delimiter
The Parani-MSP1000 waits until the configured delimiter is arrived, the received data size is the
configured fixed size or the timer is expired. If the timeout is zero, it means unlimited.

STX + data + ETX
The Parani-MSP1000 waits until a frame composed of STX + data and ending in an ETX, the
received data size is the configured fixed size or the timer has expired. If the timeout is zero, it
means unlimited.

STX + data + ETX + wildcard-characters
The Parani-MSP1000 waits until a frame composed of STX, data, ETX and some wildcard-
characters is arrived, the received data size is the configured fixed size or the timer is expired. If
the timeout is zero, it means unlimited.

5.5.6. Network service

The available options are as follows:
 Network service mode
The available modes are server, client, tunneling and vertex. If the server is selected, the Parani-
MSP1000 waits for an incoming connection. If the client is selected, the Parani-MSP1000 tries to
connect to the pre-defined remote host. The tunneling mode is a mixed mode of server and client.
The Parani-MSP1000 waits for incoming connection, but when there is data received from SPP
and the incoming connection is not established yet, the Parani-MSP1000 tries to connect to
Figure 5-6 Frame buffer configuration
38