Serial Port Profile (Spp) Configuration; Pairing Mode; Pairing Mode - Connector - Sena Parani MSP1000 User Manual

5. Serial Port Profile (SPP) Configuration

The Bluetooth devices that support Serial Port Profile are able to create connections with the Parani-
MSP1000, and are then able to send/receive data to/from remote host via TCP/IP.

5.1. Pairing mode

The operation mode option is as follows:
 Disable
The SPP service will be disabled.
 Connector
The Parani-MSP1000 scans nearby Bluetooth devices, and initiates connection to them. The
Parani-MSP1000 doesn' t accept any incoming connection.

Acceptor
The Parani-MSP1000 accepts all incoming connections. The Parani- MSP1000 will not create any
outgoing connection s.
 Custom
The Parani-MSP1000 will only communicate with the registered Bluetooth devices. The user
should set up the BD addresses of the Bluetooth devices and each paring mode.

5.2. Pairing mode - Connector

The Parani-MSP1000 scans nearby Bluetooth devices with an interval, and tries to create connection
to them. The configurable parameters are as follows:
Figure 5-1 Pairing mode
34