D-Link DIR-412 User Manual page 39

Mobile wireless router

Hide thumbs Also See for DIR-412:

Table of Contents

Section 3 - Configuration

Maximum Idle

Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable

Time:

Auto-reconnect.

DNS Servers:

Enter the Primary and Secondary DNS Server Addresses (Static PPTP only).

MTU:

Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specific ISP. 1400 is

the default MTU.

MAC Address:

The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not

recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's

MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card.

D-Link DIR-412 User Manual

Table of Contents