Pppoe (Username/Password) - D-Link DIR-412 User Manual

Section 3 - Configuration
Choose PPPoE (Username/Password) from the My Internet Connection is drop-down menu if your ISP uses a PPPoE
connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure
to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.
Address Mode: Select Static if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses.
In most cases, select Dynamic.
IP Address: Enter the IP address (Static PPPoE only).
User Name: Enter your PPPoE user name.
Password:
Enter your PPPoE password and then retype the
password in the next box.
Service Name:
Enter the ISP Service Name (optional).
Reconnect Mode: Select either Always-on, On-Demand, or Manual.
Maximum Idle Enter a maximum idle time during which the
Time:
Internet connection is maintained during inactivity.
To disable this feature, enable Auto-reconnect.
DNS Mode: Click the Receive DNS from ISP radio button if
you want to dynamically receive the DNS Server IP
addresses from your ISP. To manually enter the DNS
Server IP addresses, click the Enter DNS Manually
radio button and enter the DNS Server IP addresses
in the Primary DNS Server and Secondary DNS
Server fields.
D-Link DIR-412 User Manual
Manual Configuration (WAN Mode)

PPPoE (Username/Password)

26