System Settings - D-Link DIR-412 User Manual

Section 3 - Configuration
Save Settings to
Use this option to save the current router configuration
Local Hard Drive:
settings to a file on the hard disk of the computer you
are using. First, click the Save button. You will then
see a file dialog, where you can select a location and
file name for the settings.
Load Settings
Use this option to load previously saved router
from Local Hard configuration settings. First, use the Browse control
Drive:
to find a previously save file of configuration settings.
Then, click the Load button to transfer those settings
to the router.
Restore to Factory Click the Restore button to restore all configuration
Default Settings:
settings back to the settings that were in effect at the
time the router was shipped from the factory. Any
settings that have not been saved will be lost, including
any rules that you have created. If you want to save
the current router configuration settings, use the Save
button above.
Reboot the
Click to reboot the router.
Device:
Clear Language Click the Clear button to restore the device back to the
Pack:
English interface version and remove other languages
installed for the system web pages.
D-Link DIR-412 User Manual

System Settings

59