Manual Configuration (3G Mode); 3G Internet Connection - D-Link DIR-412 User Manual

Section 3 - Configuration
If you opt to set up your Internet connection manually, you will be redirected to a WAN page that allows you to configure
your 3G configuration parameters.
Country:
Select your country from the drop-down menu.
ISP:
Select your Internet Service Provider (ISP) from the
drop-down menu.
User Name:
Enter the user name for your 3G Internet connection.
Password:
Enter the password for your 3G Internet connection.
Dial Number:
Enter the dial number for your 3G service provider.
APN:
Enter the Access Point Name (APN) for your 3G service
provider.
Reconnect
Click a radio button to choose a reconnection mode.
Mode: The options are Always-on, Connect on demand, or
Manual.
Maximum
Enter the maximum amount of time the Internet connection
Idle Time:
should be maintained during inactivity. To disable this
feature, enable the Always-on reconnect mode.
MTU:
Maximum Transmission Unit. You may need to change the
MTU for optimal performance with your specific ISP. The
default is 1500.
Click the Save Settings button when you have finished configuring the 3G connection.
D-Link DIR-412 User Manual

Manual Configuration (3G Mode)

3G Internet Connection

17