D-Link DIR-412 User Manual page 41

Mobile wireless router

Hide thumbs Also See for DIR-412:

Table of Contents

Section 3 - Configuration

Click the Receive DNS from ISP radio button if you want to dynamically receive the DNS Server IP addresses from your

DNS Mode:

ISP. To manually enter the DNS Server IP addresses, click the Enter DNS Manually radio button and enter the DNS Server

IP addresses in the Primary DNS Server and Secondary DNS Server fields.

MAC Address:

The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not

recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's

MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card.

MTU:

Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specific ISP. 1492 is

the default MTU.

D-Link DIR-412 User Manual

Table of Contents