2.4.2 GV-BX120D / 130D Series / 140DW / 220D Series /
320D Series / 520D-0
1.
If you are using the auto iris model, plug the iris control cable to the
Auto Iris Connector on the camera.
2.
Use a standard network cable to connect the camera to your network.
3.
Optionally connect a speaker and an external microphone.
4.
Optionally connect a monitor using a Video Out wire. Enable this
function by selecting your signal format at the TV Out field on the
Web interface. See 13.1.1 Video Settings.
5.
Optionally connect to input / output devices or an infrared illuminator.
For details, see 2.5.2 Infrared Illuminator and 2.6 I/O Terminal Block.
6.
Connect power using one of the following methods:
plugging the supplied power adapter to the power port.
using the Power over Ethernet (PoE) function and the power will
be provided over the network cable.
7.
The status LED of the camera will be on.
20
Figure 2-4