I/O Terminal Block; Pin Assignment - GeoVision GV-BX130D-0 User Manual

Gv-ipcam h.264
Hide thumbs Also See for GV-BX130D-0:
Table of Contents

Advertisement

6.7 I/O Terminal Block

The 3-pin terminal block, located on the back panel of the PTZ Camera,
provides the interface to one digital input and one digital output. The I/O
terminal block can be used for applications such as motion detection, event
alerts via E-Mail and FTP, and center monitoring through Center V2 and
VSM.

6.7.1 Pin Assignment

The pin assignment for the terminal block:
Figure 6-13
For details on how to enable an installed I/O device, see 13.2 I/O Settings.
Pin
Function
1
Output
2
GND
3
Input
6
PTZ Camera
85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents