Bullet Camera - GeoVision GV-BX130D-0 User Manual

4. If you want to insert a micro SD/SDHC card, follow the steps below.
A. Loosen the fixing screw.
B. Slightly pull out the camera module.
C. Insert a micro SD/SDHC card into the memory card slot.
D. Push the camera module back and fasten the fixing screw.
5. Insert a new silica gel bag to the camera module and fasten the
camera's cover within 2 minutes of opening the silica gel bag package.
Note: The silica gel loses its effectiveness after you open the dry
camera. To prevent the lens from fogging up, it is highly recommended
to replace the silica gel bag every time when you open the camera.
Figure 5-17
Figure 5-18
5

Bullet Camera

71