Model 3231 Industrial Ethernet Extender with LCD Interface Quick Start Guide Important —This is a Class A device and is intended for use in a light industrial environment. It is not intended nor approved for use in an industrial or residential environment.
• This device contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified service personnel. WARNING • AC Powered Units: The external power adaptor shall be a listed Limited Power Source. Ensure that the power cable used...
2.0 Using the keypad The Model 3231 contains an LCD menu and keypad, located on the front panel, for configuring the unit.The four keys on the menu keypad and their functions are: Purpose ENTER • Select the current item • Advance into a submenu •...
Page 4
This is unnecessary because the CO will always reuqest the CPE’s configuration when the link comes up. Set CPE Config Send new configuration to the CPE. This must be selected after changing any of the parameters in this menu. Model 3231 Quick Start Guide...
From the top level menu on the LCD panel, use the Left and Right arrow keys to navigate to G.SHDSL, then press ENTER. If two Model 3231 units are connected back-to-back, one must be configured as , the other as Note See the Model 3231 User Manual for more information.
Do not use the CPE Config options in the LCD menu on the CPE unit for CPE configuration. Use the Note 3.3 “CPE Config” Model 3231 that you set as the CO to configure the CPE unit. See on page 4 for CPE configuration options.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public ser- vice commission or corporation commission for information. Model 3231 Quick Start Guide...
The safety advises in the documentation accompanying the products shall be obeyed. The conformity to the above directive is indicated by the CE sign on the device. The signed Declaration of Conformity can be downloaded from www.patton.com/certifications/. A.6 Authorized European Representative D R M Green, European Compliance Services Limited.
Page 9
All other trademarks presented in this document are the property of their respective owners. Warranty, Trademark, & Compliance Information For warranty, trademark and compliance information, refer to the Model 3231 User Manual available online at www.patton.com/manuals.. In accordance with the requirements of council directive 2002/96/EC on Waste of...