How To Maintain - Eureka 96 Owner's Manual

12
ENGLISH

HOW TO MAINTAIN

The instructions given in this booklet serve as a guide to rou-
tine maintenance. Keep the cleaner operating at top efficiency.
Empty the dust cup after each use.
Empty Dust Cup
Step 1: Slide dust cup latch
Step 2: Pull dust cup
D
AA
nozzle O (Fig. 9).
AA
Step 3: Pull the filter
E
AA
contents of dust cup into a waste container (Fig. 10).
Step 4: To replace dust cup
and fit dust cup into nozzle
Step 5: Gently squeeze the sections together until the dust cup
latch locks the cup in place (Fig. 11).
B
AA
Clean Dust Cup Filter
Note: Do NOT operate cleaner without the filter in place.
Clean the dust cup filter as necessary (Fig. 12).
Step 1: Remove dust cup
Step 2: Pull dust cup filter
Step 3: Shake and brush the dust and dirt from filter
Step 4: If desired, launder the filter
warm water using mild detergent.
Note: The dust cup filter is not dishwasher sate.
Do not put in dishwasher.
Step 5: Air dry thoroughly.
Step 6: Replace filter frame in dust cup
located at the top in firmly to ensure proper filter
performance.
Replace a dirty or torn filter. Order additional dust cup filter,
part number 61544.
(CONTINUED)
up.
B
AA
from handle section and lift from the
out of the dust cup , shake
D
AA
D , reinstall filter E in dust cup
AA AA
O .
AA
.
D
AA
E frame out of dust cup
AA
E by hand. Wash filter in
AA
D by pushing the seal
AA
D .
AA
.
E
AA
E
AA