How To Maintain Your Robot - Eureka NER E10s Instruction Manual

How to maintain your robot

Never operate robot without all filters, filter screen and dustbin in proper position.
Moving parts! Recharge robot vacuum cleaner after each use.
Dustbin/Water tank maintenance (clean as needed)
1. Take out the dustbin:
Press the dustbin release button
as shown and take out the dustbin.
2. Open the lid of the water tank
and clean out the remaining water.
Open the lid of the dustbin and
take out the filter.
Cleaning the mop assembly
1. Release the mop assembly and clean it.
2. Remove the mopping cloth from
the mop holder.
3. Remove debris by tApping the
filter against your garbage bin.
You can clean the dustbin, the
filter and filter mesh with water,
but remember to dry them
THOROUGHLY before reinserting
them into the robot (Do not clean
the filter elements with detergents).
4. Reinsert the dustbin into the robot. It is
recommended to clean the filter elements
every week and replace them every 1-3 months.
3. Wash the mopping cloth with water
and dry it.
Push/Pull Slot
4. Place the cleaned mopping cloth
back to the mop holder and re-install
the mop assembly to the robot.
15