Filter ... 7 Battery Disposal ... 8 Cordless, Rechargeable VACUUM CLEANER Do not return this product For assembly problems or questions contact: Eureka’s Customer Service Division toll free at 1-800-282-2886*, 7 a.m. to 8 p.m., Central Standard Time, Monday through Saturday.
Use only as described in this manual. • Use only Eureka charger D7300-02 for 120 volt and 6.0 volt battery pack 61223. • Do not pull or carry the charger by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
• Suivez les recommandations d’utilisation de ce manuel. • Utilisez uniquement le chargeur Eureka modèle nº D6300-02 pour 120 volt; et pièce nº 61223, 6.0 volt bat de pile. • Ne pas tirer l’aspirateur ou le transporter par le cordon. Ne pas utiliser le cordon en guise de poignée.
The instructions in this booklet serve as a guide to routine maintenance. If additional service is required, telephone toll free: for the nearest Eureka Authorized Warranty Station. If you prefer, you can write to The Eureka Company, Service Division, 807 N. Main St., Bloomington, IL 61701, USA. In Canada write to The Eureka Company, 866 Langs Drive, Cambridge, Ontario N3H 2N7.
Identify Parts Telescoping Handle On/Off Switch Motor Unit Dust Cup Latch Dust Cup Crevice Tool Charge the Batteries NOTE: Charge the batteries for 14-16 hours before initial use. A cleaner may lose charge in shipment. The charging plug will become warm, however, this is not a cause for concern.
HOW TO USE Use this lightweight vacuum cleaner for quick and easy cleaning. Move the nozzle over any floor covering to quickly clean dirt, lint or threads. Telescopic Handle Press down on telescoping handle release, then pull the handle out to its maximum length and release the latch so that the handle locks firmly into place.
Replace a dirty or torn filter. Order additional dust cup filters from The Eureka Company, Bloomington, IL 61701. Order dust cup filter, part number 60796. To place an order please telephone 1-800-438-7352.
NOTE: Turn off power switch before cleaning unit. To keep the vacuum cleaner looking new, it can be wiped with a damp cloth and a mild soap solution, then thoroughly dried. Never use any type of chemical as chemicals can damage the cleaner.
Need help?
Do you have a question about the 92A and is the answer not in the manual?
Questions and answers