How To Maintain Your Vacuum Cleaner - Eureka NEN170C Series Owner's Manual

How to maintain your vacuum cleaner

CAUTION:
Changing the dust bag
When the dust bag full indicator turns red, it is time to replace the existing bag with a new
one. Open the dust bag compartment by lifting the cover and remove the old dust bag,
insert the new dust bag and snap it in place.
Cleaning and Maintaining the Filters
Filter sponge
1. Open the dust bag compartment by lifting the cover.
2. Pull out the dust bag and you will see inlet sponge filter.
3. Separate the filter sponge from the machine.
4. Rinse the filter in lukewarm water and allow it to dry. Never wash the filter in a washing
machine. Do not use a hair dryer or similar device to dry it.
5. Reinsert the clean filter when it is completely dry. You may also replace the filter with a
new one.
HEPA exhaust filter
1. Remove the exhaust filter door.
2. Remove the current filter from the holder and rinse the filter in lukewarm water. Allow it to
air dry for 24 hours before placing it back into the holder.
3. Close the filter door.
Unplug from electrical outlet before
maintenance.
Dust full indicator
http://www.eureka.com/ca
7