Commands - Symbol MC9000-K/S Reference Manual

12-58 MC9000-K/S with Windows

Commands

The tables that follow summarize the AT commands, result codes, and S-Registers for the MDM 3000.
<string> represents a letter, number, or symbol to be entered. <value> represents a number to be
entered. Possible values are listed below the command.
Command
D Dial "D<string>"
() - <space>
A Off-hook and attempt to answer a call
H Disconnect – Hang UP
O Return to On-Line Data Mode. O <value>
®
Mobile 2003 Software for Pocket PCs PRG
Table 12-7. AT Command Table
0-9 DTMF digits 0-9
* The 'star' digit (tone dialing only)
# The 'gate' digit (tone dialing only)
A-D DTMF digits A,B,C,D
L Re-dial last number
P Pulse dialing
Tone dialing
T
W Wait for dial tone. (Modem waits for dial tone before dialing digits
following "W".)
Wait for silence. (Modem waits for at least 5 seconds of silence in the
@
call progress
frequency band before continuing with next dial string parameter.)
& Wait for credit card dialing tone before
continuing with the dial string.
Dial pause. (Modem pauses for a time specified by S8 before dialing
'
the digits following ",")
; Return to command state. (Modem goes off hook and allows entering
additional AT commands. Use "H" to go back to on hook.)
Ignored. (Might be used to format the dial string.)
0 Enters on-line data mode without a retrain.
1 Enters on-line data mode with a retrain.
Description
Country
Specific
X
X