Symbol MC9000-K/S Reference Manual page 604

B-30 MC9000-K/S with Windows
• Linear Sec sets the number of times a bar code is re-read to confirm an accurate decode.
Tap to toggle between Short, Redun (two times redundancy based on redundancy flags
and code length); Short, Codabar (two times redundancy if short bar code or CODABAR);
All codes *2 (two times redundancy for all bar codes); Long *2 Short *3 (two times
redundancy for long bar codes, three times for short bar codes); and, All codes *3 (three
times redundancy for all bar codes).
• Pointer Timer sets the maximum beam timer in milliseconds (0-60,000 in increments of
100ms) for pointer mode. A value of 0 means infinite time-out. Tap to select the beam
timer.
• Raster Height is not supported.
• Tap Interface Params to view and modify the values of the following interface parameters:
• Interface Type
• Power Settle Time
• Enable Settle Time
• Low Power Time.
• Tap Scan Params to view and modify the values of various scanner parameters.
• Tap Device Info to see the values of the following parameters:
• Beam Width
• Aim Mode
• Scan Direction
• Feedback
• Supported Fmts
• Max Image Rect.
• Tap Scanner Version to view the version numbers for the API, MDD, PDD, decoder and
hardware.
Refer to the SMDK Help File for Symbol Mobile Computers in the SMDK for eVC4 for details on the
available parameter options.
®
Mobile 2003 Software for Pocket PCs PRG