Battery Charging Indicators - Symbol MC9000-K/S Reference Manual

12-42 MC9000-K/S with Windows

Battery Charging Indicators

To charge the mobile computer's battery through the CAM, connect the power supply to the CAM (see
Figure 12-32 on page
begins charging automatically.
Batteries must be charged within the 32° to 104° F (0° to +40° C) ambient
temperature range.
The mobile computer's amber charge LED, located in the Indicator LED Bar (see
3), shows the status of the battery charging in the mobile computer. See
charging status indications.
The battery usually charges in less than four hours, if the mobile computer is not in use.
Serial/USB Connection
The CAM can connect to and communicate with a serial/USB device, such as a printer or host
computer, through its serial port. See
communication setup procedure.
To connect the CAM to a serial/USB device, connect one end of the serial device cable into the serial
port on the CAM and the other end into the serial/USB port on the device.
®
Mobile 2003 Software for Pocket PCs PRG
12-41), then attach the CAM to the mobile computer. The mobile computer
Serial Communication Setup on page 4-9
Figure 1-1 on page 1-
Table 1-1 on page 1-13
for the host computer
for