Symbol MC9000-K/S Reference Manual page 281

The mobile computer in MicroAP mode operates in CAM, and supports devices operating in both PSP
and CAM. The MicroAP supports up to 16 mobile computers.
Field
Enable MicroAP
Frequency Hop Settings Tap the Frequency Hop Settings drop-down list to establish the Hop Set, Hop Sequence and
Figure 5-30. MicroAP Tab
Table 5-14. MicroAP Tab Fields
Tap the Enable MicroAP check box to support MicroAP operations.
Tap the 1 or 2 Megabit Base Rate check boxes to specify the data rate within the MicroAP
cell. A MicroAP and the mobile computer are required to use the same data rate.
DTIM Delay to be used within the MicroAP cell.
Spectrum24 Configuration
Description
5-39