Spectrum24 Frequency Hopping (Fh) Settings (1 And 2 Mb Radios) - Symbol MC9000-K/S Reference Manual

5-36 MC9000-K/S with Windows
Spectrum24 Frequency Hopping (FH) Settings (1 and 2 MB
Radios)
The Spectrum24 FH Settings tabs are used to configure the mobile computer's wireless network
settings for frequency hopping. Tap Start - Settings -System tab - Spectrum24 FH Settings icon to
display the Symbol Spectrum24 FH settings window.
Tab
Mobile Unit
MicroAP
Encryption
IP Config
WLAN Adapter
®
Mobile 2003 Software for Pocket PCs PRG
Figure 5-28. Mobile Unit Tab
Table 5-12. Spectrum24 FH Tab Descriptions
The Mobile Unit tab configures the mobile computer ESSID, power management, RTS threshold,
International Roaming capability and AP options, see
The MicroAP tab sets the mobile computer to operate as an AP and establishes a single-cell
wireless network, see MicroAP Tab on page
The Encryption tab sets the WLAN adapter to make the wireless link less vulnerable to
information theft, see Encryption Tab on page
The IP Config tab configures the mobile computer profile network address parameters (IP
address, subnet, gateway, DNS and WINS) (see
The WLAN Adapter tab sets the hardware and radio settings. The password protection feature
is turned on and off from the WLAN Adapter tab,
Description
Mobile Unit Tab on page
5-38.
5-40.
IP Config Tab on page
seeWLAN Adapter Tab on page
5-37.
5-41).
5-42.