Chapter Descriptions - Symbol MC9000-K/S Reference Manual

Chapter Descriptions

Topics covered in this guide are as follows:
• Chapter 1, Getting Started
to install and charge the batteries, replace the strap and start the mobile computer for the
first time.
• Chapter 2, Operating
how to use the mobile computer, including instructions for powering on and resetting the
mobile computer, using the stylus and a headset, entering information and scanning.
• Chapter 3, Settings
programs.
• Chapter 4, Communications
communication between the mobile computer and host computer.
• Chapter 5, Spectrum24 Configuration
connection.
• Chapter 6, Wireless WAN - GSM/GPRS
System for Mobile Communication (GSM) wireless network and establish settings.
• Chapter 7, Wireless WAN - CDMA
on a Code Division Multiple Access (CDMA) wireless network and establish settings.
• Chapter 8, Bluetooth
• Chapter 9, AirBEAM Smart
a server using the AirBEAM
• Chapter 10, Rapid Deployment Client
facilitate software downloads to the mobile computer from a Mobility Services Platform
(MSP) Console's FTP server.
• Chapter 11, Applications
computer.
• Chapter 12, Accessories
how to setup power connections and battery charging capabilities, where applicable.
• Chapter 13, Software Installation on Development PC
Device Configuration Package (DCP) for MC9000w, the Symbol Mobility Developer Kit
(SMDK) for eVC4 and the Symbol Mobility Developer Kit (SMDK) for .NET on the host
computer.
• Chapter 14, Configuring the Mobile Computer
Configuration Manager (TCM) and Initial Program Loader (IPL).
lists the accessories for the mobile computer and explains how
explains the physical buttons and controls on the mobile computer,
explains how to adjust settings on the mobile computer and remove
explains how to use Microsoft
describes how to configure the Spectrum24 wireless
explains how to verify MC9062 service on a Global
explains how to activate the MC9063 mobile computer
explains how to use the Bluetooth wireless technology radio mode.
explains how to set up the mobile computer to synchronize with
®
Client and AirBEAM Staging applications.
explains how to use the Rapid Deployment Client to
describes how to use the applications installed on the mobile
describes the accessories available for the mobile computer and
®
ActiveSync
provides instructions for installing the
describes how to install and use the Terminal
xxiii
®
for