Call Transfer; 3-Way Conference - Alcatel Temporis IP800 Administrator's Manual

Call Transfer

This call function allows your phone to transfer an active call to another phone Blind
:
Transfer, Attended Transfer and Semi-Attend Transfer are supported.
To make a Blind Transfer via phone interface (no prior announcement of the call):
During an active call press Tran soft key or Transfer key , the call is put on hold.
Dial the second phone number and then hang up or press Tran soft key or to
complete the transfer.
To make an Attended Transfer via phone interface (with prior announcement):
During an active call press Tran soft key or , the call is put on hold.
Dial the second phone number, when the call is answered then hang up or press Tran
soft key or to complete the transfer.
To make a Semi-Attended Transfer via phone interface (no prior announcement of the
call):
During an active call press Tran soft key, the call is put on hold.
Dial the second phone number, while it is ringing, hang up or press Tran soft key or
to complete the transfer.
Note:
Make sure that the SIP server you have registered supports this function.

3-way Conference

Your Temporis IP800 is able to establish a three-party conference by mixing locally the
audio signals of your two correspondents.
To establish a conference via Phone Interface:
st
Once in line with 1 caller, press the Conf soft key or key.
The first call is placed on hold. You will hear a dial tone. Dial the number to conference
in（or press Pool soft key to enter into a contact list, and then choose a contact to
conference in), then press the Send soft key.
When the call is answered, press the Conf soft key or key.
71/119
Temporis IP800 Administrator Guide Ed1.0