Voice - Alcatel Temporis IP800 Administrator's Manual

Info
Stutter
Message
Auto Answer
Temporis IP800 includes preconfigured tones for a large number of countries. However
you can generate a fully customized tone set by defining their frequency and duration
To configure your tones via Web interface:
Go to Phone->Tones.
Select your country or Custom
If Custom is selected, enter the frequency (Hz) and time period (in ms) as follows:
Frequency /Time Period (for example 400/200).
Press Confirm button to save the changes, Cancel button to cancel the changes.
Note:
Please contact your system administrator for more information about the frequency
and time period parameters. You can enter up to 8 groups for each tone.
Frequency set to 0 is interpreted as a silent period.

Voice

This section allows you to configure some parameters related with Voice management
using the Web interface.
1）Go to Phone->Voice.
2）Set the following parameters:
Parameter Description
Echo canceller Defines whether to enable the echo canceller.
VAD Voice activity detection (VAD), also known as speech activity
detection or speech detection, is a technique used in speech
processing in which the presence or absence of human speech is
detected.
CNG A comfort noise generator (CNG) is a program used to generate
background noise for voice communications during periods of
silence that occur during the course of conversation.
Temporis IP800 Administrator Guide Ed1.0
32/119