Alcatel Temporis IP800 Administrator's Manual page 101

To assign the key as Forward via Web Interface:
Choose Phone->Function Keys-> Line Key or Memory Key; choose one of the keys on
which you want to make the assignment. In the pull-down menu select Forward from
the list.
Enter the extension number you want to forward to in the Extension field.
Press Confirm button to save the changes.
Transfer
You are able to configure a key as a transfer key to perform the
Blind/Attended/Semi-Attended Transfer. The main difference with Transfer hard key is
in this case you can pre-configure the number to which transfer will be performed. This
is very useful when there is a limited number of destinations to which you usually
transfer your calls.
To assign the key as Transfer via Web Interface:
Choose Phone->Function Keys-> Line Key or Memory Key, choose one of the keys on
which you want to make the assignment. From the pull-down menu in the Type field,
select Transfer from the list.
Enter the Number in the "Value" field. In this case, when you are on a conversation,
press this key, the phone will Blind transfer to the number. If you leave it blank, key will
behave as transfer hard key.
Press Confirm button to save the changes.
Hold
The key can be configured as a hold key. You can use this key to hold and retrieve a call
during the conversation.
To assign the key as Hold via Web Interface:
Choose Phone-> Function Keys -> Line Key or Memory Key, choose one of the keys on
which you want to make the assignment. From the pull-down menu in the Type field,
select Hold from the list.
Press Confirm button to save the changes.
DND
If the key is configured as DND key, it will work as a toggle key to enable/disable this
service.
Please check DND chapter in the Incoming calls section of Basic Call Functions chapter
for more information about this function.
To assign the key as DND:
Choose Phone-> Function Keys -> Line Key or Memory Key, choose one of the keys on
101/119
Temporis IP800 Administrator Guide Ed1.0