Call Hold; Call Waiting - Alcatel Temporis IP800 Administrator's Manual

unmute. When you press

Call Hold

This call function allows you to place an active call on hold. In this case your IP PBX
might play a melody or message to the other party while waiting. Other calls can be
received and made while having a call on hold.
To hold/resume a call via Phone Interface:
Press the Hold soft key or
function to put your active call on hold.
If there is only one call on hold, press the Resume soft key or
key to retrieve the call.
If there are more than one call on hold, press the line keys to toggle between the
accounts (The on hold calls are under different lines), or the Up/Down button to select
the desired call (The on hold calls are under the same line), then press the Resume soft
key or Hold dedicated key to retrieve the call.
Note:
When you are under the call hold status, putting down the handset, the conversation
will go on over the speaker instead of hanging up the call.

Call Waiting

This call feature allows your phone to accept other incoming calls when there are other
active calls.
Handling a waiting call
By default Call Waiting is enabled, and when an incoming call is received during another
active call, a warning tone will be played periodically.
In this situation, user can:
Accept the second call. The first one will be put on hold automatically.
Or
Reject the call using
Temporis IP800 Administrator Guide
button all of the conversations will be muted.
key or the key on which you have assigned the Hold
button.
Ed1.0
or the dedicated
69/119