Maximum Number Of Calls; Keypad Lock - Alcatel Temporis IP800 Administrator's Manual

Maximum number of Calls

In some situations service providers want to limit the number of calls a subscriber is
able to send or receive.
Your IP800 has been configured by default to handle 6 simultaneous calls (either
incoming, outgoing or a mixture). However you can set this limit to any number up to
20.
To set max number of calls using the web interface:
Go to Phone->Features->Max simultaneous calls
Enter the desired value and press Confirm button
Note:
This setting is independent from Call Waiting, which only limits incoming calls when
disabled. See Call Waiting chapter for more details.

Keypad Lock

You can lock the keypad of your phone when you are temporarily not using it. This
function helps you to protect your phone from unauthorized use. You can lock the
following specific keys:
Lock Menu Key: The Menu soft key cannot be used until unlocked. You cannot
access the menu of the phone.
Lock Function Keys: The hard function keys (MESSAGE, FORWARD, REDIAL, OK,
DELETE, navigation Keys, Volume adjustment button and line keys) cannot be used
until unlocked. You cannot access the hot keys such as Conf, Hold, Mute, Tran, History,
Dir, DND, etc either.
Lock all Keys: None of the keys can be used until unlocked. You can only use the
phone to answer incoming calls.
Auto Answer only: In this mode you cannot initiate or terminate calls. You will receive
calls in auto answer mode. You will also have access to the Menu.
To enable keypad lock via Phone interface:
Press Menu->3.Settings->2.Advanced, enter the password, and then press OK key.
Choose 4.Phone Setting -> 3.Lock option.
Use the right or left navigation keys to highlight the desired selection.
Press OK key to active the change, or Back soft key to return to the previous screen.
The icon will be displayed on the top right corner of the idle screen.
If you choose Auto Answer only, the icons and will be displayed.
25/119
Temporis IP800 Administrator Guide Ed1.0